Price: $64.00 - $47.99
(as of Jul 24, 2023 05:05:16 UTC – Details)
Product Description
What is it?
Throttle body regulates the proper volume of airflow into the engine which is essential to the mixture of fuel and air in the engine. If you are experiencing engine stalling, failing to start, electronic throttle warning light came on, hesitation or power surging on acceleration on your cars then you may have a problem with your vehicle’s throttle body.
The throttle body is mounted on the intake pipe between the air flow meter and the engine, and its function is similar to the throttle of the carburetor. The throttle body is linked with the driver’s accelerator pedal to control the opening of the throttle valve to change the area of the intake passage, thereby achieving the purpose of controlling the intake air amount and controlling the operating conditions of the engine. The throttle body is very important for the engine.
Customers can find the product you need accurately according to the OE part number. This is a compatible replacement part manufactured our factory. Associated vehicle models and part numbers are used in this listing only to identify the vehicles this throttle body fits.
Replacement Part Number:
4891735AA, 4891735AB
4891735AC, 04891735AC
4891735AD, 04891735AD
977-025, 977-025
For exact years and models, please check compatibility.
Compatible with
2011-2014 Chrys-ler 200 L4 144 2.4L (2360cc)
2007-2010 Chrys-ler Sebring L4 144 2.4L (2360cc)
2008-2014 Dodge Avenger L4 144 2.4L (2360cc)
2007-2009 Dodge Caliber L4 110 1.8L (1798cc)
2007-2012 Dodge Caliber L4 122 2.0L (1998cc)
2007-2012 Dodge Caliber L4 144 2.4L (2360cc)
2009-2017 Dodge Journey L4 144 2.4L (2360cc)
2007-2017 Jeep Compass L4 122 2.0L (1998cc)
2007-2017 Jeep Compass L4 144 2.4L (2360cc)
2007-2017 Jeep Patriot L4 122 2.0L (1998cc)
2007-2017 Jeep Patriot L4 144 2.4L (2360cc)
How to replace the throttle body?
Remove air cleaner and duct hose with a screwdriver. Disconnect electrical connector on the MAF by pulling out the plug. Disconnect intake air temperature sensor in the air duct.
Disconnect idle air control on the side of the throttle body by pulling the electrical connector. Disconnect the throttle position sensor opposite the throttle cable levers.
Disconnect throttle cables by turning the throttle lever on the throttle body all the way open by hand and removing the now slackened cables from the throttle lever.
Remove bolts running through the throttle body and into the intake manifold. Use ¼-inch drive socket and ratchet, lift the throttle body off the intake manifold. Protect the metal gasket that is in between the throttle body and intake. This gasket must be reused. Install new throttle body in reverse order.
Electrical Throttle Body Installation Notes
After replace throttle body, the idle speed is usually high, unstable or engine fault light on.
This is because car ECU stores the original throttle parameters, and the newly installed throttle body parameters are inconsistent with the original.
Now you need to match throttle to the computer. The matching process actually is to clear the original memory of the ECU, and restart the self-learning.
When there is no matching computer or the computer cannot match, you can use the following manual method to match.
1. Disconnect negative pole of the battery line to eliminate the memory function of the ECU, and install it after 1 minute.
2. Turn off ignition switch, unplug EFI and ETCS fuses in the fuse box in engine compartment, and put it back after 1 minute The above two methods are to eliminate the ECU’s memory, if idle speed is still high, ECU can return to normal speed through 1-2 days of self-learning.
Throttle installation notes:
Whether the gasket needs to be replaced.
Whether the mounting screws have been tightened.
Whether there is air leakage in other places.
The electronic throttle body regulates the proper volume of airflow into the engine which is essential to the mixture of fuel and air in the engine. If you are experiencing engine stalling, failing to start, electronic throttle warning light came on, hesitation or power surging on acceleration on your Dodge or Jeep then you may have a problem with your vehicle’s throttle body.
This Electronic Throttle Body Fits for the Following Vehicles: 2011-2014 200 L4 144 2.4L; 2007-2010 Sebring L4 144 2.4L; 2008-2014 Dod-ge Avenger L4 144 2.4L; 2007-2009 Dod-ge Caliber L4 110 1.8L; 2007-2012 Dod-ge Caliber L4 122 2.0L; 2007-2012 Dod-ge Caliber L4 144 2.4L; 2009-2017 Dod-ge Journey L4 144 2.4L; 2007-2017 Compass L4 122 2.0L; 2007-2017 Compass L4 144 2.4L; 2007-2017 Patriot L4 122 2.0L; 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 Patriot L4 144 2.4L.
Customers can find the product you need accurately according to the OE number. Replacement part number: 4891735, 4884551AA, 4884551AB, 4884551AC, 04891735AC, 4891735AC, 4891735AB, 4891735AA, THRB-JEEP001,THRBJEEP001, 977-025, 977025, 04891735AD, 4891735AD.
The electronic throttle body assembly frequently requires replacement due to internal electronic sensor failure and excessive wear and tear. Sold as a complete unit, our throttle body features a butterfly valve which is electronically controlled by the engine control unit to precisely open and close to regulate the fuel/air mixture. Replacement restores proper engine function. Exact fit for bolt-on and plug in installation.
